Technical Specifications
Mechanical
Dimensions 442 x 120 x 43.7 mm (17.4 x 4.7 x 1.7")
Weight Without mounting brackets: 2.6 kg (5.8 lb)
With mounting brackets: 2.7 kg (6 lb)
Enclosure material SGCC steel
Hardware
Management interface Ethernet In-Band
Networking interface (8) 10G SFP+ ports
Total non-blocking throughput 80 Gbps
Switching capacity 160 Gbps
Forwarding rate 119.04 Mpps
Power method Universal input, 100—240V AC, 5060 Hz
Power supply ACDC, internal, 36W
Supported voltage range 100—240V AC
Max. power consumption 30W
ESDEMP protection Air: ± 16kV, contact: ± 12kV
Max. number of supported SFP+ modules UACC-OM-MM-10G: 8
UACC-OM-SM-10G: 8
UACC-CM-RJ45-10G: 4
UACC-CM-RJ45-MG: 4
Services SMB Layer 2 GbE switch
LCM display (1) 1.3" LCM color touchscreen
Button Factory reset
Ambient operating temperature -5 to 40° C (23 to 104° F)
Ambient operating humidity 10 to 90% noncondensing
Certifications CE, FCC, IC
0 Reviews
Ubiquitis USW-AGG is a fully managed Layer 2 switch with 8x SFP+ ports and up to 160Gbps switching capacity. It features a compact 4.7" depth and fanless design. It is easy to mount and silent even under full load. It provides link aggregation for higher capacity and increased availability. The unit features a 1.3" touch LCM to provide status information.
Layer 2 features IGMP snooping
STP RSTP with priorities and port-level disable
Port isolation
Storm control
Voice VLAN
Port mirroring
LACP port aggregation
Multicast broadcast rate limiting
MAC address blocking
Flow control
802.1X control
Jumbo frames
Proprietary loop protection
DHCP snooping guarding
Egress rate limit
LLDP-MED
Port restricted by MAC
Device isolation with ACLs
₦9,138.58 ₦10,052.44
₦1,121.34 ₦1,233.47
₦22,213.88 ₦24,435.27
₦15,380.90 ₦16,918.99
₦8,834.78 ₦9,718.26
₦9,460.64 ₦10,406.70
(4.5)
₦37,477.94 ₦41,225.73
(4.5)
₦8,172.47 ₦8,989.72
₦4,938.28 ₦5,432.11
₦31,426.05 ₦34,568.66
₦14,361.90 ₦15,798.09
₦22,776.60 ₦25,054.26
₦1,605,273.34 ₦1,765,800.67
